ISI’s expertise in NEXT LEVEL INTEGRATION blends high density packaging with advanced interconnect technologies to quickly deliver optimized modular solutions. This multi-discipline approach improves performance, reduces size & cost, & speeds time-to-market.
Home
Jumpers/Shunts 2mm (.079") Centers
Technical Data
Recommended PCB Patterns
Headers
Insulator
- Material - Hi-temp glass filled thermoplastic, 94V-O
- Temp rating -65° C to + 260° C
- insulation resistance 5000 MEG OHM @ 500 VDC
- Heat deflection - 260° C @ 264 psi
- RoHS Compliant
- Color - black
Terminal - .020 sq pin unless otherwise noted.
- Material - Phosphor Bronze, drawn wire, burr free both ends.
- Current Rating - 2 amp continuous @ 100 VDC
TOLERANCES - unless otherwise noted on a specific part, the following tolerances apply to all parts.
| Straight Headers | |||||||
|---|---|---|---|---|---|---|---|
| "A" | "B" | "C" | "D" | ||||
| mm | Inch | mm | Inch | mm | Inch | ||
| Ref | .203 | .008 | .254 | .010 | .254 | .010 | |
| Right Angle Headers | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| "A" | "B" | "C" | "D" | "E" | |||||
| mm | Inch | mm | Inch | mm | Inch | mm | Inch | mm | Inch |
| .203 | .008 | .254 | .010 | .254 | .010 | .254 | .010 | .254 | .010 |
| Surface Mount Headers | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| "A" | "B" | "C" | "D" | "E" | |||||
| mm | Inch | mm | Inch | mm | Inch | mm | Inch | mm | Inch |
| .254 | .010 | .203 | .008 | .254 | .010 | .254 | .010 | .508 | .020 |
Sockets
Stamped Type
Insulator
- Material - Glass filled thermoplastic, UL 94V-O Rated
- Temp Range - -65°C to +260°C
- Insulation Resistance - 5000 MEG OHM @ 500 VDC
- RoHS Compliant
- Color - black
Contact
- Material - Phosphor Bronze
- Current Rating - 1 amp continuous @ 100 VDC/Contact
Screw Machine Type
Insulator
- Material - Glass filled thermoplastic, UL 90 V-O rated
- Temp Range - -65°C to +260°C
- Insulation Resistance - 5000 MEG OHM @ 500 VDC
- Heat Deflection - 260° C @ 264 psi
- RoHS Compliant
- Color - black
Contact
- Shell - Phosphor Bronze
- Contact Clip - 6 Finger BeCu Spring
- Current Rating - 3 amps continuous @ 100 VDC/Contact
Press Fit Type
- One piece BeCu Contact
- Current Rating - 1 amp continuous @ 100 VDC
- Temp Range - -65° C to + 260° C
TOLERANCES - unless otherwise noted on a specific part, the following tolerances apply to all parts.
| "A" | "B" | "C" | "D" | "E" | |||||
| mm | Inch | mm | Inch | mm | Inch | mm | Inch | ||
| Ref | .254 | .010 | .254 | .010 | .254 | .010 | .254 | .010 | |
PLATING VALUES
| TLF | = | 150u" (3.8u) pure bright tin over 50u" (1.3u) Ni |
| G | = | 3- 5u" (.08 - .13u) gold over 50u" (1.3u) Ni |
| G1 | = | 10u" (.25u) gold over 50u" (1.3u) Ni |
| G130 | = | 30u" (.76u) gold over 50u" (1.3u) Ni |
| G2LF | = | 10u" (.25u) gold over 50u" (1.3u) Ni at mating end - balance of pin 150u" (3.8u) pure bright tin over 50u" (1.3u) Ni |
| G230LF | = | 30u" (.76u) gold over 50u" (1.3u) Ni at mating end- balance of pin 150u" (3.8u) pure bright tin over 50u" (1.3u) Ni (Consult Factory) |
| G30 | = | 30u" (.76u) gold over 50u" (1.3u) Ni in mating zones- The balance of the pins is gold flash. |
| P1 | = | 50u" (1.3u) Ni overall, followed by 30u" (.76u) Palladium/Ni overall, followed by 3u" (.08u) gold overall |
| P2 | = | 50u" (1.3u) Ni overall, followed by 30u" (.76u) Palladium/Ni overall, followed by 3u" (.08u) gold on mating area, 150u" (3.8u) pure bright tin over 50u" (1.3u) Ni balance of pin |
Ordering
| All part numbers have a "BASE" number, to which must be added the number of circuits desired, and plating requirements. High temp plastic is available on most products, and where hi-temp is always supplied, it will be indicated on the catalog page. If hi-temp is desired, and it is not on the catalog page, call us for availability. |
|